64-1000 - The logical choice for all off road racing. A proven unit, made with double heat treated chromoly rack gears. Standard pattern makes this a perfect replacement. Hard anodize for wear. (1 1/2 to 1 ratio) This rack is set up for off road vehicles using international tie rod ends and uses a 3/4" 48-spline pinion gear.

64-1000-5/8 - The logical choice for all off road racing. A proven unit, made with double heat treated chromoly rack gears. Standard pattern makes this a perfect replacement. Hard anodize for wear. (1 1/2 to 1 ratio) This rack is set up for off road vehicles using 5/8 tie rod ends and uses a 3/4" 48-spline pinion gear.

64-1000T - Front steer A-Arm Rack--The logical choice for all off road racing. A proven unit, made with chromoly, rack are double heat treated gears. Housings are hard anodized for wear. Made for 1/2" heims and uses a 3/4" 48-spline pinion gear. Eyelets for tie rods 5" apart. Special Orders Available

Same quality as 64-1000 set up for Ford tie rod ends. (1 1/2 to 1 ratio)

64-1002 - A-Arm Rack and Pinion- This rack is the same dimensions as the 64-1000 Rack and Pinion. Can be used on front steer or rear steer, A-arm or trailing arm cars. Rack gear is made of 4130 Chromoly. Housing is hard anodized. Heims are 2.320" apart and uses a 3/4" 48-spline pinion gear.

64-1002P - Polished A-Arm Rack & Pinion--This rack is the same dimensions as the 64-1000 Rack and Pinion. Can be used on front steer or rear steer, A-Arm or trailing arm cars. Heims are 2.320" apart for maximum travel and less bump steer. This rack has a 3/4" 48-Spline pinion gear. Fully Polished Aluminum.

64-1003L - This Rack is set up for left hand steer and for use with international tie rod ends and has a 3/4" 48-Spline pinion gear.

64-1003L-5/8 - This Rack is set up for left hand steer and for use with 5/8" tie rod ends and has a 3/4" 48-Spline pinion gear.

64-1003LE - This Rack is set up for left hand steer and is an end-load rack and has a 3/4" 48-Spline pinion gear.

64-1005 - The logical choice for all off road racing. A proven unit, made with chromoly rack double heat treated gears. Standard pattern makes this a perfect replacement. Set up for international tie rod ends only. Hard anodize for wear. (1 to 1 Steering Ratio Lock to Lock)(Recommended for Short Course Only) This rack has a 3/4" 48-Spline pinion gear.

64-1011 - A-Arm Rack and Pinion- This rack is the same dimensions as the 64-1000 Rack and Pinion. Can be used on front steer or rear steer, A-arm or trailing arm cars. Rack gear is made of 4130 Chromoly. Housing is hard anodized. 1/2" Heims are spaced 2.320" apart and this rack uses a 3/4" 48-spline pinion gear. This rack is identical to the 64-1002 except for the steering ratio. Steering Ratio: 1-1 (Recommended for Short Course Only)

64-1021 - Polished Buggy Rack-- This rack is recommended only for light weight sand cars with minimal travel and maximum weight no more than 1200 pounds. Rack is made with chromoly rack double heat treated gears. Uses a 1/2" hole 1.800" apart for the tie rod ends. Housing is fully polished. This rack has a 3/4" 48-Spline pinion gear.